ADDER AV4PRO-VGA Guia do Utilizador descarregar pdf (Página 10)

 









USER

CONSOLE

OPTIONS

2.5A

INDOOR

USE

ONLY

USER

CONSOLE

OPTIONS

Power in connection

The AV4PRO-VGA unit is supplied with either a 12.5W (single screen version) or

20W(Multiscreenversions)poweradapter.Thereisnoon/offswitchontheunit,

so operation begins as soon as a power adapter is connected.

2 ConnecttheIECconnectorofthesuppliedcountry-specicpowerleadto

the socket of the power adapter.

To connect the power supply

1 Attach the output lead from the power

adapter to the 5V socket on the rear panel

of the unit.

3 Connectthepowerleadtoanearbymainsupplysocket.

Note: Both the unit and its power supply generate heat when in operation and

will become warm to the touch. Do not enclose them or place them in locations

where air cannot circulate to cool the equipment. Do not operate the equipment

in ambient temperatures exceeding 40 degrees Centigrade. Do not place the

products in contact with equipment whose surface temperature exceeds 40

degrees Centigrade.

Optional RC4 remote control

TheoptionalRC4remotecontrolunit(fullpartnumber:RC4-8P8C)canbeused

to provide direct push button access to any channel from your desktop. The

RC4remotecontrolissuppliedwitha3metrecablethatisusedtolinkwiththe

OPTIONS port on the rear panel of the unit.

To connect the remote control

1 Connecteitherendofthesuppliedcabletothesocketattherearofthe

RC4remotecontrol.

2 ConnecttheotherendofthecabletotheOPTIONS port on the rear panel of

the unit.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 29 30

Sem comentários

ADDER AV4PRO-VGA Guia do Utilizador Página 10