ADDER ADDERView RDX 5000IP Guia do Utilizador descarregar pdf (Página 12)

 







Further information

Troubleshooting

Interference signal appears on the screen when shutting down the

system

• Inrarecasesinterferencemayappearonthescreen.Thismaybecausedby

signal rate of the video card and is considered normal. The image quality can

be improved by adjusting the phase or pixel rate.

The membrane power light is not ON

• PressthePowerOn/Offbuttonondisplaymembranetocheckwhetherthe

monitor is switched on.

• Checkthepowercordisproperlyconnectedtotherackdrawerandpower

outlet.

Screen image is not centered or sized properly

• Pressthe button for ﬁve seconds to automatically adjust the image.

Auto adjust can also be initiated within the geometry section of the OSD

menu.

• AdjusttheH-positionandV-positionsettingsviatheOSDmenu.

SECT 5

Getting assistance

If you are still experiencing problems after checking the list of solutions in the

Troubleshooting section then we provide a number of other solutions:

• Adder Technology website – www.adder.com

Check the Support section of our website for the latest solutions and driver

ﬁles.

• Fax in the UK: 01954 780081

in the US: +1 888 275 1117

• Phone in the UK: 01954 780044

in the US: +1 888 932 3337

Screen speciﬁcations

The following speciﬁcations apply to both screen sizes unless indicated

otherwise:

Maximumresolution 1280x1024

Brightness 300Cd/m

Contrastratio 1000:1

Viewingangle 160

x160

Displayarea 338x270mm(17”model)or376x301mm(19”model)

1 2 ... 7 8 9 10 11 12 13 14 15

Sem comentários

ADDER ADDERView RDX 5000IP Guia do Utilizador Página 12