ADDER AdderLink AV200 series Guia do Utilizador descarregar pdf (Página 10)

 







Using the optional rack mount chassis

1 Place the optional rack plate onto the front of the transmitter or receiver

module and secure it with the countersunk screws.

2 Orientthemoduleonitssidesothatitslabelledfaceisthecorrectwayup

and the securing plate is facing away from the rack.

3 Slide the module into the required rack position.

4 The rack mount chassis has a series of holes in its ﬂoor that are spaced

toaccommodatethescrewsonthemodule’sloweredge.Ensurethatthe

screws correctly locate into the holes of the chosen slot. The rack securing

plate on the module should now be ﬂush with the front of the rack mount

chassis.

5 Use the supplied (pan-head) screws, in the top hole of the rack securing

plate to fasten the module to the rack.

TRANSMITTER

ADDERLINK

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 30 31

Sem comentários

ADDER AdderLink AV200 series Guia do Utilizador Página 10