ADDER X2 Especificações descarregar pdf (Página 5)

 







 





SECT 3

Installation and operation

LOCAL module switches (continued)

LOCAL Switch 1

OFF: Normal operation.

ON: (Whilst power is applied) Places the REMOTE module into password

override mode. This allows any pre-conﬁgured passwords to be altered -

particularly useful when they have been lost or forgotten. Please see the

‘Password override’ section in the ‘Special conﬁguration’ chapter.

LOCAL Switch 2

OFF: Normal operation.

ON: Set transparent mode. Use this setting if the extender modules are to be

used with KVM switches that are not manufactured by Adder Technology.

Cascaded KVM switches often use special signals to set or identify

conditions. In transparent mode, the extender modules will pass the signals

without attempting to interpret them.

LOCAL Switch 3

OFF: Microphone input on REMOTE module. Use this setting if a standard mono-

channel microphone is connected to the MIC input on the REMOTE unit.

ON: Stereo line-in input on REMOTE module. Use this setting if a stereo input is

applied to the MIC input on the REMOTE unit.

LOCAL Switch 4

OFF: Normal operation.

ON: Suspend operation and reset the LOCAL module. Use this setting

momentarily to produce the same effect as removing and restoring power

if incorrect operation has occurred. Return the switch to the OFF position

to allow normal operation to continue.

Installation

The installation of the X2-Series extender set is straightforward and can best be

achieved in most cases by following these stages for each module:

• StageA Check or set the conﬁguration switch settings

• StageB Mount the module

• StageC Connect the cables

Stage A - Conﬁguration switch settings

The basic operation of the LOCAL and REMOTE modules are controlled by the

banks of four switches located on the side of each module. The switches are

monitored at all times and may be changed when power is on or off (the only

exception to this rule is switch 1 of the LOCAL module which initiates slightly

different functions depending on the power state when it is switched).

LOCAL module switches

OFF: Normal operation

ON: Transparent mode

OFF: Normal operation

ON: reset password mode

OFF: Normal operation

ON: Reset LOCAL module

OFF: Microphone input mode

ON: Stereo line-in mode

Note: When shipped, all switches are set in the OFF positions and this will

produce normal operation with normal microphone input (at the REMOTE

module).

1 2 3 4 5 6 7 8 9 10 ... 21 22

Comentários a estes Manuais

Sem comentários

ADDER X2 Especificações Página 5

Comentários a estes Manuais

Manuais e produtos relacionados com Extensores para consolas ADDER X2